S4METRO, Solutions 4 Metrology
Company
Services
Industrial Metrology3D inspection, outsourcing and programming.Dimensional EngineeringReverse engineering and 3D printing.Technical TrainingS4METRO Academy — AUKOM, GD&T and software.Technical SupportMulti-brand maintenance, calibration and retrofit.
Brands
WerthComputed tomography and optical measurement.CreaformHigh-precision portable 3D scanning.RenishawMeasurement systems and CNC automation.Metrologic GroupUniversal 3D inspection software.COORD3FAROView all brandsOur complete ecosystem.
Equipment

3D Scanners

Portable scanning with extreme agility.

CMM Machines

The gold standard of three-dimensional rigour.

Computed Tomography (CT)

Non-destructive analysis of internal geometries.

Measuring Arms

Tactile flexibility on the shop floor.

Optical Machines

Non-contact precision micro-inspection.

Software

The intelligence behind the point cloud.

Measurement Software

Metrologic Group

Quality Control Software

High QA

Blog
Contact
PortugueseEnglishEspañol
3D rendering of colourful plastic gears arranged in a grid, measured by Werth TomoScope computed tomography
HomeBlogApplication of Computed Tomography in the Plastics Industry: The alternative to conventional measuring equipment
Case Studies

Application of Computed Tomography in the Plastics Industry: The alternative to conventional measuring equipment

How Werth TomoScope® XS Plus systems are replacing traditional measuring equipment in the plastics industry, with accuracy and speed impossible to achieve with conventional machines.

S4METRO·20 July 2026· 4 min read

3D coordinate measuring machines with computed tomography sensors are now widely used in the plastics industry and are increasingly replacing traditional measuring equipment. The TomoScope® XS Plus systems from Werth stand out especially for their measurement precision combined with a speed impossible to achieve with conventional measuring machines.

A new benchmark in plastics quality control

Today, these machines are used in production control, quality assurance, and injection mould development, for example, to directly calculate mould corrections. Computed tomography allows the entire external and internal geometry of the part to be obtained in a single scan, providing complete 3D data for dimensional analysis, nominal/actual comparison, and reverse engineering.

Measuring plastic gears in seconds

Small plastic gears can be tested in a production cycle of just a few seconds per part. It is possible to analyse 96 gears together in just 2.5 minutes. The measurement point clouds are automatically assigned, the entire tooth geometry is measured, and all gears are checked for defects such as burrs.

This ability to measure multiple parts simultaneously, without contact and without the need for individual clamping, makes CT particularly suitable for series production of small plastic components, where traditional methods would be too slow or unfeasible.

Inspection of connectors and hybrid components

Connector with metal terminals and plastic body inspected by Werth computed tomography

The dimensional precision of metal and plastic components can, for example, be measured in connectors and cable plugs in the installed state, and the connection terminals can be automatically checked for defects and burrs. This analysis in the assembled state is a distinctive advantage of computed tomography: it allows internal metal contacts and the surrounding plastic body to be measured simultaneously without disassembling the component.

Automatic burr detection with WinWerth®

The optional burr detection process, integrated into the WinWerth® software, provides a colour-coded deviation map of the burr and its maximum length. This functionality dramatically speeds up compliance analysis, replacing manual visual inspections with a quantitative and reproducible assessment.

Why CT replaces conventional machines

Unlike coordinate measuring machines with traditional probes or optical sensors, a TomoScope® XS Plus system offers:

  • Complete volumetric acquisition: internal and external geometries measured simultaneously, without cutting parts.
  • High productivity: tens or hundreds of parts measured in a single acquisition, suitable for series production.
  • Automatic defect detection: burrs, deformations, and form deviations identified by nominal/actual comparison.
  • Mould development support: dimensional deviations are directly translated into corrections applicable to the mould cavity.

Industrial application with S4METRO

At S4METRO, we represent and integrate Werth solutions into production environments, supporting plastic component manufacturers in adopting computed tomography as a central quality control tool. We complement equipment supply with measurement services, calibration, training, and technical support, ensuring that technology translates into real gains in quality, time, and cost.

Brands

#Werth

Related solutions

Equipment

  • Industrial Computed Tomography (CT)

Services

  • Computed Tomography Service

Brands

  • Werth

Related articles

Werth coordinate measuring machine with WinWerth software measuring a rotor lamination in a laboratory
Technical Article

The Transition to Sustainable Mobility Starts in Production

Fast, high-resolution and process-reliable measurement, from computed tomography to multisensor technology, to secure quality from rotor laminations to 100% battery cell inspection.

18 Sept 2026 6 min
Werth TomoScope L computed tomography machine for dimensional metrology
Metrology

Computed Tomography for 3D Dimensional Metrology: Werth TomoScope® Solutions

How X-ray computed tomography is redefining 3D dimensional metrology, enabling precise, fast, and non-contact measurement of external and internal part geometries.

20 Jul 2026 7 min
César Mourão and the character Dona Esperança next to the 3D model of the bust scanned with a Creaform scanner by S4METRO for the SIC's Esperança series
Case StudiesMetrology

3D Scanning of César Mourão: When Technology Meets Art in the Series Esperança

S4METRO 3D scanned César Mourão's bust with Creaform GoSCAN and HandySCAN 3D scanners for the creation of the characterisation of Dona Esperança, in SIC/Opto's series Esperança.

6 Aug 2026 5 min

Services

MetrologyDimensional Control3D ScanningComputed TomographyEngineeringReverse EngineeringMaintenanceCMM RetrofitEquipment CalibrationAcademyAUKOM

Equipment

3D ScannersPortable 3D ScannersCMM MachinesMeasuring ArmsOptical MachinesComputed Tomography (CT)Equipment SalesBook a Demo

Company

About S4METROOur teamLocationsCertificationsBlogFAQMetrology GlossaryCarreirasContactPrivacy PolicyCookie Policy
Projects co-financed by:
Co-funded by Portugal 2020Co-funded by Portugal 2030Funded by the PRR
S4METRO
© 2026 S4METRO - SOLUTIONS FOR METROLOGY ·